(+1) 917 775 3388
www.nymasksupply.com
Get direction

Google map

Atlantik V2 just how to connect with the Wi Fi Router or Control one or more light without router;

Atlantik V2 just how to connect with the Wi Fi Router or Control one or more light without router;

Atlantik V2 just how to hook up to the Wi Fi Router or Control one or more light without router;

for connecting the Atlantik V2.X to your property Wi Fi router you need to proceed with the 11 steps.

1. Switch off all units.

2. Switch on just the unit that is first will link.

3. In your tablet pick the wifi-socket.

4. Start Chrome from your own tablet and type 192.168.1.100 within the target club.

5. Username admin password 000000

6. Change mode to Sat.

7. Place your community SSID and password. ( Encryption constantly Disable : ( the system believe it is automaticly )

9. Head to system within the menu that is main and click restart.

10. Head to wifi establishing once again and alter to your community router SSID.

11. get the Orphek app and do search id, it will get the very first product.

Then do from 1 to 11 for the staying devices.

7. SSID : place your Router Wi-Fi Network Name ( SSID Name ).

Into the SSID package you shall key in your system name. This is certainly situation sensitive and painful so make sure to utilize money or letters that are small it’s proper. Within the encryption key box: key in your Wi-Fi network password if have actually . ( Encryption constantly Disable : ( the system believe it is automaticly )

Select /Keep ,disable into the encryption field (never confuse with encryption key field). Your tablet will immediately discover the encryption key in the event your router supports it.

9. Into the left that is upper of UART display screen you certainly will a selection of fundamental, Advanced, and System.

Click system TAB plus in the section that is first of page you’ll see a restart switch. Press the restart switch. a screen appear saying the web web web browser cannot hook up to the internet protocol address. It is fine as you should should connect with your router SSID.

10. On the tablet /Phone hook up to your wi-fi Router network SSID.

11.Open the Orphek software and then click the clear switch regarding the top right associated with the display. Now click on the search switch situated on the top left associated with the display screen. Your network should discover the tablet along with your IP that is new address your Orphek light should appear.

Repeat actions 1 to 11 for the staying Orphek devices.

* choice : you can easily set the internet protocol address fixed , for better connection

You shall then go to:

A. Unchecked The Enable DHCP

B. Enter a static internet protocol address that belongs to your house router. For instance:

If for example the router is 100.168.20.1, then you can certainly enter 100.168.20.2 or any IP between .2 and .254.

the internet protocol address should be unique or even it will probably cause an internet protocol address conflict

C. It’s also advisable to go into the submask as well as in many cases it really is 255.255.255.0.

D. Enter the Gateway Address : it ought to be your Router internet protocol address

E. Then do the exact exact same towards the staying devices. BUT etch unit will need to have IP address that is unique .

example:

In case your Home Router set:

ssid: house

password : 12345678

internet protocol address 192.168.100.1

submusk 255.255.255.0

then you definitely should set device 1

1.work type: Sta

2.SSID: house

3.Encryption Disable : ( the system believe it is automaticly )

4.Encryption key: 12345678

5.then click Save

6. Unchecked The Enable DHCP

7. set : internet protocol address: 192.168.100.10

8. set :submusk: 255.255.255.0

9. set Gateway Address 192.168.100.1

11. Head to system within the primary menu, and then click restart.

12. get the Orphek software and do search id, it must discover the unit that is first.

you then should set product 2 –

OBS: First turn OFF product 1 (therefore be no any internet protocol address conflict )

1.work type: Sta

2.SSID: house

3.Encryption Disable : ( the system think it is automaticly )

4.Encryption key: 12345678

5.then click Save

6. Unchecked The Enable DHCP

her dating sign up

7. set : internet protocol address: 192.168.100. 11

8. set :submusk: 255.255.255.0

9. set Gateway Address 192.168.100.1

11. Head to system in the main menu, and click restart.

12. get the Orphek software and do search id, it will find product 2 .

Share this post

There are no comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Start typing and press Enter to search

Shopping Cart

No products in the cart.